Audi Intelligent Interaction - Restraint Systems
HERNDON, VA - Audi is using innovative thinking to further advance development in this field. The engineers in Ingolstadt have focused particular attention on safety belts, airbags, and seats/headrests.
HERNDON, VA - Audi is using innovative thinking to further advance development in this field. The engineers in Ingolstadt have focused particular attention on safety belts, airbags and seats/headrests. These components interact intelligently in model lines such as the A4, A5, and Q5 to provide maximum protection for the occupants during an accident.
In today's traffic conditions, rear impact is a frequent type of accident, especially in urban areas. This type of crash typically occurs at collision speeds of 9 to 31 mph, for instance at traffic lights. In such impacts, the seatback is accelerated to between 4 to 15 mph in barely a tenth of a second. If the head is violently flung backwards instead of being supported in line with the thorax, the victim frequently suffers a whiplash injury, which often requires protracted and costly therapy. Insurance companies estimate the annual cost in Germany to exceed EUR 500 million.
The seats and headrests are specifically designed for a rear impact. The shape of the seatback frame, a resilient back pad and an energy-absorbing foam layer allow the back to sink slightly into the seatback, so that the head can be intercepted a moment earlier by the sturdy headrest just behind it. In severe rear impacts, the seatbelt tensioners in the A4, A5 and Q5 are released to optimize the positions of the occupants.
Audi uses its integral headrest system in most of its models. The brand has already received the top rating of "Good" in independent tests, including by the prestigious International Insurance Whiplash Prevention Group (IIWPG), which specializes in whiplash prevention. In Germany, the ADAC and leading trade magazines have reached similar conclusions, as has the US Insurance Institute for Highway Safety (IIHS).
Among severe traffic accidentsthe frontal impact remains the most common type of crash, with a share of 50 percent. Fortunately this type of accident is no longer the most dangerous, since deformation zones, safety steering, columns, seatbelts and airbags have greatly reduced its peril. But Audi isn't settling for the existing solutions and has developed an adaptive restraint system for the A4, A5 and Q5 model series. It provides the best possible protection for different sized occupants; in smaller, lighter persons especially it significantly reduces the severity of injuries. Audi engineers have attuned the subsystems to each other in an innovative, high-precision network. In this work they have also benefited from the results of in-house crash research by the AARU (Audi Accident Research Unit, see Audi Technology ABC).
The rails of the front seatsare equipped with sensors that detect whether the seat is in the forward or rearward position. Their data flow into the calculations of the restraint control system. Since the computer knows the approximate position of the occupant in relation to the airbag, it can ensure optimal use of the available forward displacement region - the distance in which the upper body is decelerated by the belt and the airbag - which significantly reduces the effect of the impact on the occupants.
The operation of the adaptive airbags in the current Audi model series is based on a new, graduated strategy. The airbags - with a volume of 64 liters (2.26 cubic feet) on the left side and 120 liters (4.24 cubic feet) on the right - unfold differently than in the conventional two-step systems: they always deploy fully at first to ensure prompt deceleration of the occupants. However, if the impact is less than severe, or when a (usually less than average-size) passenger sits close to the airbag, a lower restraint force suffices. In these cases, a portion of the air volume is expelled through special valves: the airbag softens and intercepts the head and thorax more gently. In a severe crash, on the other hand, or with large occupants farther back in their seat, these valves remain closed longer, and the airbag exerts its maximum restraining effect.
The belt force limiters too react flexibly. In this subsystem, two small torsion bars are interconnected by gears. For smaller and lighter persons, the torsion bars are disengaged promptly. This provides more slack in the seatbelt, enabling the upper body to sink deeply into the airbag, which reduces the force on the thorax. In more violent crashes, the torsion bars are disengaged later or not at all, increasing the belt's restraining force.
The IIHS has recently awarded no less than four Audi models the "Top Safety Pick" rating again for the second time in a row for their high level of occupant safety. And in the Euro NCAP test the Audi A4 earned the highest rating of five stars.
More Safety

Tips for Driving Safely on Halloween Night
This video features a reminder from the Connecticut Department of Transportation (DOT) and the Connecticut Police Chiefs Association, urging drivers to prioritize safety this Halloween.
Read More →
IIHS Crash Avoidance Tests Reveal Safety Gaps in Cargo Vans and Work Trucks
New IIHS crash avoidance ratings show uneven performance among cargo vans and heavy-duty pickups, with most struggling to avoid vehicle-to-vehicle collisions.
Read More →
What’s Next for Fleet? Safety, AI & Industry Recognition | AF News Recap
Could your company's culture be encouraging distracted driving? This week, we're exploring how workplace expectations affect driver safety, what AI, EVs, and autonomous vehicles could mean for the future of fleet management, and how fleet professionals can strengthen their award nominations.
Read More →
Does Your Fleet's Culture Encourage Distracted Driving?
What happens when the people responsible for enforcing safety rules are the ones setting the wrong example? The answer may reveal why some of the biggest risks to fleet drivers have little to do with what's written in the employee handbook.
Read More →
Fleet Manager’s Ultimate Playbook: Navigating the New Standard in OEM Connectivity
Rising operating costs, driver safety concerns, and unplanned downtime are putting unprecedented pressure on modern fleets. Discover how fleet managers use embedded OEM connectivity and real-time vehicle data to cut TCO, prevent downtime, and protect drivers without aftermarket telematics hardware.
Read More →
From Driver Well-Being to EV Charging | AF News Recap
Mental health belongs in the fleet safety conversation. This week, we’re looking at five ways fleets can support employee well-being before a crisis, plus Holman’s expansion in Mexico, new one-day Fleet Forward passes, and why EV charging demand is outpacing infrastructure growth.
Read More →
Nexar-Nauto Merger Aims to Give Fleets Better Safety Intelligence Through Larger Driving Dataset
Stefan Heck tells Automotive Fleet that combining more than 10 billion miles of driving history with Nexar's AI models will give fleets deeper insights into driver risk and roadway conditions than either company could provide independently.
Read More →
Don't Wait for a Crisis: 5 Ways to Build Mental Health Into Your Fleet Safety Program
For Suicide Prevention Month, fleet and safety leaders have an opportunity to put mental health where it belongs: at the center of workplace safety.
Read More →
How Camera Data Can Strengthen a Fleet’s Insurance Renewal
Insights from a commercial insurance carrier and a broker show how fleets can turn video telematic data, driver coaching, and improved claims results into a stronger case at insurance renewal.
Read More →
The Safest Fleets Aren’t the Ones with the Most Technology
You’ve made the telematics investment. Here’s how to capture the other half of its value and build the safest fleet on the road.
Read More →