Avoiding 5 Common Vehicle Ordering Mishaps
View a pdf of this article as it appeared in the magazine
It wasn't all too long ago that ordering vehicles was almost an entirely manual process. Spec books were three fingers thick, driver selectors were sent by mail, and vehicle requisitions contained three or four copies. Mistakes were not uncommon, and the process was lengthy.
Today, technology has made the entire process far faster, more accurate, and simpler for all. Drivers can complete online selectors, fleet managers can transfer the selections to online ordering systems, and status can be checked any time online. However, one element of the process remains in place: At some point, someone has to enter the data, and errors still occur. Here are some of these errors, and how they can be avoided.
1. Work with Experts to Spec Trucks
Ordering trucks, or in particular, jobsite trucks, can be difficult and confusing. When trucks are required to carry or tow heavy loads, it is critical to make certain that drivetrain and other components can handle the job. Unless a fleet manager has a background in truck engineering, under- or even over-spec'ing a work truck can cause any number of problems - such as premature failure or weak fuel economy - leading to higher lifecycle costs and potential emergency replacements.
Avoiding truck spec mistakes is a relatively simple matter. If the fleet is leased, every lessor has qualified truck engineers on staff who are experts in building trucks to the job spec. For an owned fleet, the ordering dealer has the same expertise on staff. Use these resources whenever truck specs are developed and vehicles are ordered. Provide a detailed description of the mission, including precise data on loads to be carried or towed, for how long, and under what conditions. Better still, invite these experts to the jobsite, or on a "ride along" with drivers so they can see firsthand what kind of job the truck will be doing. Using the expert resources available will help avoid spec errors and keep fleet expenses in line.
2. Limit Vehicle Color Options
Leaving the color choice to the driver can lead to errors: the wrong shade of green, white instead of silver, gray interior instead of blue. Today's technology can actually make these errors more common, as online box-checking has in some cases replaced handwritten paper requisitions. When picking up the new vehicle, drivers are told to make certain the vehicle is the exact one ordered, and if the color is wrong, they are quite justified in refusing delivery.
Avoiding such errors is a simple matter of having a pre-placement audit process in place, where the fleet manager carefully reviews the order against the driver's selector before the order is placed. If drivers are entering the order, place responsibility for its accuracy there; if the vehicle comes in wrong, require the driver to take delivery.
Another way of avoiding color issues is to limit the colors drivers can choose. A number of fleets order the same color for everyone, not allowing driver selection. Keep in mind that although a vehicle may well be part of a compensation package, or offered to a new employee when he or she is recruited, it is seldom if ever offered "in the color of your choice." Unless the vehicle is purely compensatory (executive) in nature, it is a tool, and the company has every right to choose what vehicle is offered, its color, and its equipment.
3. Ensure On-Time Orders
Getting orders to the lessor (or manufacturer) on time, before build-out, is a crucial part of every year. Unfortunately, sometimes either the fleet manager gets tied up in something else or the drivers don't respond in time, and orders are put in "build-out limbo," where they'll often end up as orders for the next model-year.
First, automate driver notifications; set up automatic e-mails in the company e-mail system (Lotus Notes, for example) so drivers are reminded when they haven't sent in a selector. Pay close attention to missives from the manufacturer, the lessor, or the ordering dealer, who will all keep you up to date on their build-out and final order dates. Ensure odometer readings come in regularly (most companies receive odometer readings via a fleet fuel card program), and run replacement reports early.